Everyone knows an unfinished wood floor is the best way to highlight a rustic home: but how do you keep it clean? The answer changes significantly depending on whom you ask and your desired results.
Strong chemicals can strip and stain the wood of its natural grain. Too much water will make them discolor or warp.
It is a fragile balance, but there are methods to clean your unfinished wood floor safely without damaging it. Let us explore the most excellent options.
Regular cleaning is necessary to keep dirt and dust from staining or scratching your unfinished wood floor. Even if you include a no-shoe policy, dirt will find a way inside. The most excellent way to battle damage is to create a regular cleaning schedule.
If you include a hardwood vacuum with bare floor scenery, you are in luck — the simplest and easiest way of removing dirt and dust without damaging the boards. If you are not satisfied that the beater bar is set high enough, test it in a less noticeable area first.
While brooms are a clear choice, some methods work better than others for the unfinished wood floor. Look for a static dust mop or a soft-bristled model. Keep in mind to use light strokes and glide, rather than push the dirt.
Be sure to listen for sounds of scraping, as tiny rocks can stick in the bristles and leave scratches.
When it is time to mop unfinished wood, use liquids carefully. Use a moist mop; there is no need to flood the floors. Excess water will immerse into unfinished boards, and leave behind marks.
When choosing a cleaner for unfinished wood floor, look directly to your storeroom. That is right; good old’ vinegar is the weapon of choice for many cleaning experts. Besides being cost-effective, vinegar is an all-natural product that is safe to apply in your home.
Vinegar is acidic and can be useful if not diluted in water. Most solutions need 1 gallon of water for a ½ cup of vinegar. To reduce streaks, mop in the track of the floorboards and apply long strokes.
One disadvantage of vinegar is the smell. It will dissipate eventually, but the fumes can be overwhelming. Experts advise buying odorless vinegar or adding a few drops of essential oil to the mix.
Rather than letting your floors air dry, make use of a clean cloth to hand dry each part.
Deep Cleaning Unfinished Wood Floor
Two chemicals helpful at removing stains from unfinished wood are Trisodium Phosphate and mineral spirits. Both of these agents will extremely clean your floors while leaving behind a typical shine.
Mineral Spirits is a petroleum-based liquid, frequently used to get rid of paint on brushes and tools.
When applied as a cleaning agent, it can get rid of stains without harming your floors. Apply the product into the boards with either a lint-free cloth or soft pad.
Finish by wiping up any excess with a clean rag or towel. If you are not sold on mineral spirits, there is one more option.
Trisodium Phosphate is a crystallized powder that’s accessible at your local hardware store or home improvement. Use a scrub brush to aid the chemical into the stain and follow with a warm water rinse. Absorb any excess liquid to stop permanent water damage.
Remember that when using either of these methods, preparation is critical. For the best results, your floors must be clean and free of debris and dust.
As with any cleanser, be certain to conduct a spot test before working in an obvious area.
Necessary Safety Precautions
These chemicals are unstable and pose health risks. They are extremely flammable and should not be used or stored close to open flames or sparks. Use great caution when working with both of these products.
Constantly wear a respirator when working with toxic products. Check your area is well ventilated to prevent contact with obnoxious fumes. Do not use these solvents in the presence of anyone with known respiratory problems or children.
These substances may irritate the skin and cause painful reactions. Guard yourself by wearing thick gloves intended for chemical applications.
Always read directions before use, and if you have any questions, ask the manufacturer. Keep in mind, these products pose considerable risks – ensure to dispose of all rags and gloves legally and responsibly. In the event of adverse reaction or contact, seek medical help right away.
Cleaning your unfinished hardwood floors takes some research and a bit of elbow grease, but it is not unfeasible. If you do make an error, all is not lost. The beauty of unfinished wood is that it can continuously be sanded to its normal state.
Everyday cleaning is not difficult and does not need a ton of training or special tools. For bigger jobs, be sure to think about your options and avoid doing unnecessary risks.
When working with dangerous chemicals, always consult the manufacturer and pursue guidelines to the letter. If you are uncertain about completing the work yourself, ask an expert cleaning company for rates.
Unfinished wood floors offer a natural elegance. They are a brilliant choice for anyone seeking to make an environment that radiates character and charm.